View Fabric Attach Interface Configuration
Use this procedure to view FA interface configuration.
Procedure
Example
The following example displays sample outputs for the show fa interface command.
Switch:1>show fa interface ======================================================================== Fabric Attach Interfaces ======================================================================== INTERFACE SERVER MGMT MGMT MSG AUTH MSG AUTH TCN ORIGIN STATUS ISID CVID STATUS KEY ------------------------------------------------------------------------ Port 1/1 enabled 0 0 enabled **** Port1/10 enabled 0 0 enabled **** Port1/6 enabled 0 0 enabled **** Port1/11 enabled 0 0 enabled **** Mlt2 enabled 0 0 enabled **** ------------------------------------------------------------------------ 5 out of 5 Total Num of fabric attach interfaces displayed ------------------------------------------------------------------------
The following is a sample output for the show fa interface command for the port 1/6.
Switch:1>show fa interface port 1/6 ========================================================================== Fabric Attach Interfaces ========================================================================== INTERFACE SERVER MGMT MGMT MSG AUTH MSG AUTH TCN ORIGIN STATUS ISID CVID STATUS KEY -------------------------------------------------------------------------- Port1/6 enabled 0 0 enabled **** -------------------------------------------------------------------------- 1 out of 4 Total Num of fabric attach interfaces displayed --------------------------------------------------------------------------
The following is a sample output for the show fa interface command for the MLT 2.
Switch:1>show fa interface mlt 2 ========================================================================== Fabric Attach Interfaces ========================================================================== INTERFACE SERVER MGMT MGMT MSG AUTH MSG AUTH TCN ORIGIN STATUS ISID CVID STATUS KEY -------------------------------------------------------------------------- Mlt2 enabled 0 0 enabled **** -------------------------------------------------------------------------- 1 out of 4 Total Num of fabric attach interfaces displayed --------------------------------------------------------------------------
Variable definitions
The following table defines parameters for the show fa interface port command.
Variable |
Value |
---|---|
{slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} |
Identifies the
slot and port in one of the following formats:
|
The following table defines parameters for the show fa interface mlt command.
Variable |
Value |
---|---|
<1–512> |
The valid range for MLT ID. |